An ultrasound-based sensing technique developed for medicine could have wider application. The question that inspired the technique was: how do we spot leaks from the gut after gastric surgery? Neither ultrasound, CT or MRI scanning could be used to remotely determine local chemistry around the internal wound, according to Northwestern University, which teamed up with the Washington University School of ...
Medical Electronics
Content related to medical electronics
APEC: 4kW multi-output ac-dc psu
Advanced Energy Industries is showing its NP08 4kW ac-dc power supply at APEC in Long Beach this week. The first member of its NeoPower (NP) family of configurable multi-output supplies, it has eight output slots for configuration and 18W/inch3 claimed density for ~283 x 203 x 64mm chassis. Input is single-phase 90 – 132Vac and 180 – 264Vac. “NP08 also ...
Fortec aims PC and COM Express module at medical applications
Distributor Fortec is aiming medical markets with a PC and COM Express Type 6 module from Axiomtek – both based around Gen 12 and 13 Intel processors (Alder Lake and Raptor Lake respectively) mBOX602 is the PC, for i7, i5 and i3 processor processors up to 65W supported by 2x DDR4-3200 SO-DIMM up to 64Gbyte. “The mBOX602 is IEC 60601 ...
Solid State Disks increases speeds in latest replacement drive
The SCSIFlash-Fast is a swap-in upgrade/replacement for electromechanical hard disk drives (HDDs) that use the small computer system interface (SCSI). Initially available with 68- and 80-pin connectors, this generation of HDD has write speeds of up to 80MByte/sec, increased from 10MByte/sec. The drive uses proven SCSI drive architecture and industrial CFast or M.2 SSD memory, and has storage capacities ranging ...
Murata shrinks multi-amp mini automotive inductors
Murata has announced multi-amp miniature automotive SMD inductors that are over 30% better than their forebears. Measuring 2 x 1.6 x 1.2mm (0806 or 2016), there are two types: DFE2MCPHR33MJLLQ 0.33μH ±20%, 0.018Ω 5.1A max (6.4A typ) at 40°C rise 6.9A max (8.1A typ) at 30% inductance change DFE2MCPHR47MJLLQ 0.47μH±20%, 0.022Ω 4.4A max (5.5A typ) at 40°C rise 5.4A max ...
The age of digital healthcare heralds IoMT
With increasing use of the IoT in healthcare and medical applications, the internet of medical things is emerging to operate alongside the IoT in logistics, industry and consumer products, says Tomohide Yamazaki. The internet of medical things (IoMT) market is expected to grow significantly in the future, rising from $113bn in 2021 to reach $341.17bn by 2028, according to Global ...
DigiKey MedTech video series takes the pulse of evolving medical devices
DigiKey is launching Season 1 of its MedTech Beyond Video Series, produced in conjunction with NXP Semiconductors and Recom Power. The distributor’s latest series – it has also covered automation, Smart Cities and supply chains, for example – explores the evolving landscape of medical devices. “As healthcare needs and technology both rapidly advance, DigiKey is proud to support the needed ...
ESA awards contract to service Space Rider robotic laboratory
The European Space Agency (ESA) has awarded Tyvak International a €4.5 million ($4.7 million) contract for a “proximity operations and in-orbit servicing mission” that will deploy a nanosatellite spacecraft from Space Rider. This is the planned European uncrewed robotic laboratory. Tyvak – specifically, the Italian corporate entity of the organisation – will be the prime contractor for the project that ...
German NewSpace firms launch taxi service for microgravity biotech research
Rocket Factory Augsburg (RFA), the Bavarian rocket company, has announced a partnership with Yuri and ATMOS Space for the launch of ‘Eva’, an end-to-end service for microgravity life science research and product development. ATMOS Space Cargo develops reusable and modular return space capsules designed for scientific payloads, experiments, and equipment, while Yuri develops modular bioreactors and incubators to be used, ...
Buzzers automatically make IEC 60601-1-8 medical alarm sounds
CUI Devices has announced a line of medical buzzers compliant with IEC 60601-1-8 alarm signal requirements. There are four CPIM-4410-80x buzzers, with a letter replacing the ‘x’ depending on function: C for the cardiovascular tone, T for the general tone, V for the ventilation tone and Y for the oxygen tone. Each has a stand-by (silent) mode and three alarm ...