Samtec is releasing a variety of board-level and cable connector systems for JTAG applications, which are currently shipping in volume quantities, says the interconnect manufacturer. The Samtec JTAG connectors are available on 2.54 mm and 1.27 mm centerlines. Common sizes are 10 pin (2 x 5), 14 pin (2 x 7), and 20 pin (2 x 10). JTAG connectors are ...
The JTAG port was introduced more than 30 years ago, but has changed as the industry has evolved, says James Stanbridge. For some engineers the term JTAG means a device programming port. For others it exists to plug in a microprocessor emulator or debugger. Originally it was devised for neither of these applications. The acronym JTAG stands for the Joint ...
Gowin GoBridge is a family of bridging chips that convert a USB interface to different serial and parallel busses. “The GWU2X family enables conversion between USB and four peripheral interfaces: JTAG, SPI, I2C and GPIO; while the GWU2U series is suitable for conversion between USB and UART,” according to distributor Rutronik, which is stocking the parts. “This provides Gowin with ...
XJTAG has updated its XJDeveloper test and programming IDE with test automation features.
JTAG Technologies introduces a JTAG/boundary-scan test hardware interface for multiple interconnects in ATE systems using MAC Panel connection systems.
Cambridge-based test firm XJTAG joins with Flying Test Systems to apply its boundary scan test tools in a range of design for test services.
Goepel Electronic will use next month’s Electronica exhibition in Munich to present a 2D/3D camera module for optically inspecting PCBs and ball grid-array chip packages. 3-D imaging is now making its impact on automated optical inspection (AOI) and the key feature, says Goepel, is providing shadow-free 3D measurement. What it has done with the 3D·ViewZ module is to combine 2D image acquisition ...
JTAG Technologies is sponsoring a new UK conference for hardware development engineers will will take place near Cambridge in April. The conference called H/WExpo will cover topics as board development, board bring up, hardware validation and production testing. The conference is being held at Cambourne near Cambridge on the 27th and 28th April 2016. It is free to attend for engineers and ...
ElectroTestExpo is a dedicated PCB test and hardware debug event which will take place at Culham Labs in Oxfordshire. A seminar programme will be supported by an exhibition of RF and bench-top instruments, along with a full range of PXI and JTAG-based ATE. The organisers, which include JTAG Technologies, are also laying on a tour of JET (nuclear fusion research) facility for attendees at Culham ...
Jtag Technologies is kicking off the New Year with a series of online seminars for designers who want to integrate boundary-scan into their test strategy. The free online seminars will cover several JTAG boundary-scan topics. January 15 – Testing I2C on boards with ARM, Cortex, MPC5, Tricore, PIC32, PXA or IXP based processors. January 18 – Choosing the right test system. For further ...
Electronics Weekly Electronics Design & Components Tech News
