Medical Electronics

Gowanda Electronics has introduced a series of non-magnetic RF inductors for medical imaging equipment – MRI and some x-ray machines – and other applications where magnetic materials must be avoided. Called 28MG, there are 60 devices spanning 1.2 to 18µH with resistances between 79mΩ and 4.15Ω, and carrying capacity of 315mA to 2.4A. They are all the same size, with bodies 23mm ...

Good quality sleep is linked to behavioural issues in young children. Laurence Weir looks at new sensor technology which tracks sleep patterns. The quality of a child’s sleep can have a huge impact on their lives. According to the American Academy of Pediatrics, a quarter of children under the age of five do not get adequate sleep. A continual lack ...

Wireless ‘neurograins’, 48 of them, have been used to record rodent neural activity, at Brown University in Rhode Island. The sensing particles independently record electrical pulses made by neurons and send the signals to a central hub outside the skull for coordination and processing. “One of the big challenges in the field of brain-computer interfaces is engineering ways of probing as ...

Precision cleaning of wearable electronics boosts reliability, says Emily Peck of Microcare. The past year has seen a huge boost in the growth for wearable devices to diagnose and monitor patient health. The importance of remote patient monitoring (RPM) has become even more important in the wake of the Covid-19 pandemic. Lockdowns, travel restrictions and the requirement for social distancing ...

Harvard and MIT researchers have teamed up to prototype a self-contained saliva-based diagnostic Covid test that can distinguish between variants in an hour and is “just as accurate as the PCR tests now used”, according to MIT. It is called ‘miSherlock’, for ‘minimally-instrumented Sherlock’, where Sherlock is a Crispr-based DNA/RNA test invented at Harvard’s Wyss Institute for Biologically Inspired Engineering. Two ...

Do not touch! Please, do not touch! Because that doesn’t have to be the case at all. A new generation of switches for touchless switching has been developed for exactly this purpose. Switching without touching. Switching without contaminating the surface with potentially harmful germs, viruses or bacteria. How do these switches work and what are they capable of? SCHURTER TTS: ...

Review Display Systems (RDS) of Kent has introduced an 8in TFT display module from industrial display manufacturer Tianma. Part of Tianma’s professional (‘P’) series, P0800WVF1MA00 features WVGA (800 x 480 pixels) resolution, 15:9 aspect ratio and -30°C to +80°C operating range. “The Tianma P-series display line-up is designed for use in a wide range of human-machine interface applications where guaranteed, long-term operation ...

Smiths Interconnect has introduced a lower-cost variant to its Hypergrip range of medical connectors. Called Hypergrip Flex, the main change is a move from its >20,000 insertion cycle Hyperboloid socket contact to its >2,000 insertion cycle ‘MR’ socket – an 0.4mm diameter socket suited to “standard cycle life applications”, according to the company.  Comparing Hypergrip and Hypergrip Flex Both Hyperboloid and MR ...

The stress hormone cortisol could be detected accurately by a straightforward bedside test, according to researchers at Rutgers University. They are using an electrode coated in an antibody that binds with cortisol to do the detection, and needed the counter electrode to be really close to keep sensitivity high and noise low. At a few microns apart, interdigitated fingers were ...

TDK-Lambda has introduced a series of ac-dc mains power supplies rated at 350W convection, 500W with forced air and 1kW peak. Called CUS350MP, the PSUs have medical and industrial safety certifications. Input can vary across 85 to 265Vac (with leakage current <300µA). Four output voltages are available: 24, 30, 36 and 48V, plus a 5V 300mA isolated stand-by voltage – remote on/off is also fitted ...