Home » Markets » Industrial Electronics (page 22)

Industrial Electronics

Electronics related to industrial applications

64-channel ultrasound transmitter for industrial and medical instruments

312D0EB1-BF5A-4D87-B66B-140EA3A0A2AE-300x200.jpeg

ST has introduced a 64-channel ultrasound transmitter with new features to enhance the image quality and convenience of high-performance portable industrial and medical instruments. Today’s ultraportable scanners are almost the size of a smartphone yet deliver image quality comparable to large and expensive high-end systems from only a few years ago. ST’s STHVUP64 transmitter, which drives the instrument’s piezoelectric transducers, ...

6 x 4mm diodes replace DPAK for automotive and industrial

Nexperia CFP15B clip package

Nexperia has introduced more clip-bonded surface-mount diodes for industrial and automotive applications. There are 32 planar Schottky diodes and eight hyperfast recovery rectifiers, with some AEC-Q101 ‘Q’ types for automotive, all in the company’s 5.8 x 4.3 x 0.95mm CFP15B package (also SOT1289B). “Using the smaller CFP15B instead of DPAK or SMB/C packages can save up to 60% of board ...

50W dc-dc converters work across 14 to 160Vdc

TDK PYQ PYH PYD dcdc converters

TDK has introduced quarter brick isolated 50W dc-dc converters with a 12:1 input range: 14 to 160Vdc There are also similar 75W converters, this time with a 9-75Vdc (8:1) input range, Quarter brick converters (left hand in image), with smaller 20W parts as well as larger 200W parts in the pipeline (see below).  Called PYQ50, there are three 50W quarter ...

Sponsored Content: EDAC connectors in the TME catalogue

2560x800-300x200.jpg

Durable and secure connections for industrial and automotive applications. Signal connectors from the 140 series Waterproof E-Seal connectors Edge connectors All kinds of electronic equipment need the right kind of connections in order to operate properly. Thanks to them it is possible to supply power to a particular module or send information between two printed circuits. We can connect an ...

Harwin adds male options to 1.5kV 60A Kona connector range

Harwin Kona connectors

Harwin has added male flying leas options to its Kona high-power compact connector range, rated at 1.5kV and 60A per contact. All the new parts are suited to 8AWG wire. “This addition makes it possible to bring male and female cables together for the first time in a cable-to-cable arrangement, whereas previously we were only offering Kona in cable-to-board options,” ...

Industrial development board gets Elkhart Lake processor and 16Gbyte of ram

UP-Squared v2

Industrial PC maker Aaeon has updated its UP Squared development board, putting an Intel Pentium J6426 Elkhart Lake processor into its 85 x 90mm footprint. There is also a Celeron N6210 version. As well as being used for product development, the company expects it to be built into products and bought by makers. “Users can take advantage of 1.7x the ...

Automotive electrolytic capacitors peak at 4Arms, 100KHz

NIC-Components_High-CV_Capacitor_NSPE1-PR

NSPE-HC from NIC Components is a series of AEC-Q200 automotive-grade surface mount aluminium electrolytic capacitors. In five case sizes from 6.3 x 6.3mm diameter to 12.8 x 10mm diameter, the series covers 56 to 560μF in ratings of 25 and 35Vdc, with operation over -55 to +105°C and a load life rating of 5000 hours at +105°C. “The performance of ...

250W 1/16th brick dc-dc converters are tough for vehicles and industry

TDK Lambda RGA dcdc 1/16 brick

TDK has introduced 250W 1/16th brick (~36 x 26 x 13mm) non-isolated dc-dc down converters for use in harsh environment. Efficiency is up to 98%, reducing heat dissipation and allowing operation with the case between -40°C to +110°C. Called RGA, they are capable of operating from 9 to 40V, or 9 to 53V. For the 40V input version, the output ...

30, 60 and 90W DIN rail ac-dc PSUs for industry

Cosel-WDA30-60-90F

Cosel has introduced three DIN rail mount ac-dc power supplies for industrial applications, in three power levels: 30W, 60W or 90W. Intended for rack-mount use, all operate over 85 to 264Vac, and ambients of -20 to +70°C with derating caveats depending on local ventilation. The 30W model, WDA30F, is available in four different output voltage variants: 5, 12, 24 or ...

Leonardo set to boost apprentices, industrial placements by 50%

Jay-Mistry_Leonardo-300x200.png

Leonardo is highlighting that it is increasing its early careers population in the UK by 50% over the coming year. The aerospace engineering company – with UK electronics sites including Basildon, Edinburgh, Luton and Southampton – says it is planning to hire an additional 300 apprentices, industrial placements and graduate scheme starters in 2023. This will bring the total number ...