Tag Archives: connector

Surrey UK based Cliff Electronics has created versions of its DualSlims FeedThrough connectors to suit the North American market with #4-40 (UNC) threaded mounting holes. The connectors measure 19 x 35.5mm (17.15 x 22.86mm panel cut-out = 0.675 x 0.9in), allowing up to 20 connectors to be mounted across the front of a 1U, 19inch rack panel. Mounting holes are ...

ODU has added its EBP (expanded beam performance) optical connection technology into its Mini-Snap Series K, Medi-Snap, ODU-Mac product ranges. “As a non-contact lens technology, EBP achieves low attenuation, virtually no cleaning or maintenance requirements and a long service life,” claimed the company, which explained: “Under normal conditions no maintenance is required  – cleaning the ferrule is only necessary in ...

Rutronik has picked the ST12 from JAE for customers seeking a ‘push-push’ microSD card connector that is robust – up to 10,000 mating cycles – and whose solder joints can be inspected – as the case is cut away. “This series makes its inspection and repair simpler through the use of external surface-mount leads, which are visible and easily accessible,” ...

Kyocera AVX has created a series of waterproof poke-to-insert wire-to-wire connectors. It rates its 9289-000 series as IP67, and is aiming them at industrial, transportation, commercial and consumer markets. “These single-piece, three-position connectors are the sixth poke-home wire-to-wire connector series in the Kyocera AVX portfolio, but the first waterproof connectors in the range,” according to the company. which describes them ...

CUI Devices has announced single-position terminal blocks in blue, green, red, white or yellow, that can be snapped together to create custom colour-coded PCB-solder-mount screw-less terminal blocks. There are three types: TBL-0014-750 – 7.5mm pitch top-entry poke-in TBL-0015-750 – 7.5mm pitch side-entry poke-in TBL-0016-1000 – 10mm pitch side-entry lever-operated 7.5mm types are rated at 0-40A and 0-300V (UL), or 41A ...

Kyocera AVX has introduced a series of solderless wire-to-board removable edge connectors. Called 9169-000, they combine insulation displacement contacts for the wire with beryllium copper compression contacts for board edge pattern. Locating ribs engage with slots on the PCB edge for polarisation against improper insertion, and moulded plastic clips drop into holes in the PCB to improve retention. “It is ...

Hirose has announced a range of circular connectors with self-aligning elements for blind-mating – where connectors have to be mated without direct visual or hand access. “HR34P Series panel mount connector guides itself into the correct mating position,” according to the company. “The blind-mating connector is designed for applications where the electrical receptacle is recessed or hidden – commonly used ...

Molex has introduced MX-Dash, a family of single automotive connectors that combine power, signal and high-speed data inserts for zonal architectures. In wire-to-wire and wire-to-board form, they are aimed at autonomous driving modules, cameras, GPS, infotainment, lidar, displays and sensors. There are sealed and un-sealed options, and configurations with 0.50, 0.64, 1.20, 1.50, 2.80 or 4.80mm terminals as well as coaxial ...

Powell Electronics is stocking series 806 Mil-Aero connectors from Glenair. “The products offer significant size and weight savings while meeting key performance benchmarks for a broad range of applications such as commercial and military aerospace, industrial robotics, transportation systems and more,” according to the component distributor. Designed for use in harsh vibration, shock and environmental settings — as well as ...

CUI Devices has started making a selection of pogo pins and PCB pins – the former being spring-loaded and the latter rigid. The PCB pins are all press-fit, while the pogo pins are through-hole, surface-mount or wire-mount. All come under its CPG… part number family. “The CPG family of pogo and PCB pins offers gold plated contacts for high reliability ...