Tag Archives: Recom

Recom has created a 15W ac-dc power supply range that meet a wide range of international specifications including those for medical use. RACM15E-K supplies come in 80 x 23.8 x 22mm open-frame form with Molex connectors (photo below), or in a 83 x 26.4 x 29.5mm IP20 enclosure with push-in terminals and a DIN rail clip (right) – they are ...

Recom has announced a series of 140W single-output ac-dc mains power supplies that can handle 210W for ten seconds. The RACM140E-K series offers a choice of 12, 15, 24, 36 (136.8W rated) or 48Vdc depending on model. The input range is 80-264Vac and they measure 147 x 81.5mm – either 38mm tall for the open frame versions or 40mm enclosed ...

Recom has launched a series of DIN-rail ac-dc power supplies with 90 to 264Vac inputs and 120W, 240W or 480W outputs – and it has some new mini buck dc-dc module evaluation boards. Efficiency of the ac-dc DIN modules is up to 93.5%. All measure 123.4mm deep by 123.6mm high, and width is 30mm, 40mm or 56mm respectivley. The models are: ...

Recom has built an isolated 5V output dc-dc converter that will work from 9 – 36Vdc. Measuring ~32 x 21 x 10mm, the through-hole pin-out of REC5K-2405SRW/H4/A is based on the industry-standard DIP24 plastic package. Nominally it is designed to run from 24V, and will deliver its full 1A output from inputs between 18-36Vdc, then 4A from 12-18V, and 3A ...

Recom has created 12V and 48V variants of its 24V 450W RACM600-L ac-dc mains power supply. Like the original, they are open-frame supplies with an aluminium U-channel chassis measuring ~100 x 200x 40mm, this time delivering up to 430W by convection cooling and using convection cooling, and 600W continuously if there is sufficient airflow. Peak power from the original was ...

Recom is aiming at railway use with a family of DIP24 isolated regulated dc-dc converters that will run from between 36 and 160Vdc. Surges up to 200V can be tolerated for 1s. “Dc-dc for rail applications typically operate from 72V, 96V, or 110VDC nominal input with dips and surges,” according to the company. There are 10W (RP10-RAW), 6W (RP06-RAW) and 3W ...

Recom puts a 5W isolated dc-dc converter with a 9 – 36V input range into a 1 x 1inch plastic package – actually 25.4 x 25.4 x 10mm. REC5K-2405SAW/H4, as it will be known, provides a regulated 5V output, at 1A with 18 – 36V inputs – the ‘AW’ in the part number announces this wide (4:1) input range. 4W ...

Recom is aiming at a 25.4 x 25.4mm footprint with a range of 10mm high through-hole mounting 30W regulated dc-dc converters. Called the REC30E-Z series, the parts have 4:1 input ranges – either 9 – 36V or 18 – 75V. Depending on model, output is a choice of a single 3.3, 5, 12, 15 or 25V, or a double ±12V ...

Recom has released isolated regulated dc-dc converters in a common 13.2 x 9.1 x 10.2mm high surface mount package, with ratings up to 5W and 4:1 input ranges. R5M, R3M, R2M and R1M are rated at 5W, 3W, 2W, and 1W respectively. R2M types are also available in the DIP8 through-hole package. Input ranges of 9 – 36Vdc or 18 – ...

Recom is aiming at what it calls ‘cost-sensitive’ medical, industrial and IT applications with 130W open-frame ac-dc power supplies. “Safety certifications include 2MOPP/250Vac medical for ‘B’ or ‘BF’ applications to IEC/EN/ANSI/AAMI ES 60601-1, as well as IEC/EN 62368-1, IEC/EN 60335-1 and IEC/EN 61558-1 for industrial, test and measurement, IT and household use, all to 4000m altitude,” it said, adding: “EN ...