Tag Archives: Vishay

Vishay has added five solenoid-based haptic actuators to its IHPT range, which come with operation licenses from Immersion Corporation. There are four sizes, from 29 x 21mm to 44 x 37mm, that can provide forces up to 120N. Not immediately obvious from the photo, each transducer us in two parts: the top left part is a separate laminated metal bar ...

VETH100A1DD1 is a bidirectional ESD protection diode for automotive Ethernet, compliant with OPEN Alliance 100Base-T1 and 1000Base-T1. Made by Vishay, it comes in a wettable flank DFN1006-2B package  measuring 1 x 0.6 x 0.45mm. Working range is ±24V, and clamping is typically at 31V for 1A, “a result of its snap-back technology with a trigger voltage >100V”, said the company. ...

Vishay has introduced a series of surface-mount solid moulded tantalum chip capacitors specifically for electronic detonation systems “combining a robust mechanical design with low leakage current and stringent testing specifications”, according to the company. “Each part is 100% surge current tested using standard screening methods, and undergoes two additional screenings for key electrical characteristics to eliminate lot-to-lot variations.” Called TX3, ...

New Yorker Electronics is aiming at displacing PowerPAK 1212 packaged mosfets by stocking a pair of symmetric 80V n-channel mosfets in a single 3.3 x 3.3mm package from Vishay. Called SiZF4800LDT, the “device provides designers with a space-saving solution for synchronous buck converters, point-of-load converters, and half-bridge and full-bridge power stages,” according to New Yorker. “In these applications, the high ...

Government consent for the acquisition of Newport Wafer Fab by Vishay has finally been given by Deputy Prime Minister and Secretary of State in the Cabinet Office Oliver Dowden. The site has now been renamed Newport Vishay. Vishay’s $177 million offer for the fab was accepted last November but the government has been dragging its feet for four months over ...

The Shadow Secretary of State for Wales has written a letter to the Secretary of State for Wales  accusing the government of “dither and delay” and of “dragging its feet” in deciding whether the proposed takeover by Vishay can go ahead, reports the Guardian which has seen the letter. Ever since 2021, when Newport Wafer Fab was about to be ...

Vishay has introduced four ultra-fast 200V rectifier diodes: VS-1EAH02xM3 (1A) VS-2EAH02xM3 (2A), VS-3EAH02xM3 (3A) VS-5EAH02xM3 (5A) “Their low-profile DFN3820A housings provide a space-saving solution with high efficiency, predestined for commercial, industrial and especially automotive applications – they are each available as Vishay Automotive Grade, AEC-Q101 qualified versions,” according to distributor Rutronik, which is stocking the parts. Taking the 3A VS-3EAH02HM3 ...

Vishay has squeezed point-of-load buck regulators into a 10.6 x 6.5 x 3mm package, including one that accepts inputs across 4.5 to 60V and can deliver 6A continuous at voltages down to 800mV. Another has a 25A output. Internal synchronous rectification allows efficiency, in one model, to be as high as 97%. “The regulator modules each offer two high performance ...

Vishay has released an infra-red receiver designed to be used outdoors in light barriers and reflective presence detectors. TSSP93038 will work up to 1m reflectively or 11m in a light curtain when irradiated at 1.3mW/m2. The ambient light rejection strategy comes in two parts: the first is that the device’s peak sensitivity is to light at 940nm, and the second ...

Vishay has introduced three series of 24V surface-mount transient voltage suppressors (TVS) that offer peak pulse power dissipation equivalent to the 7kW of conventional TVS at 10/1000μs in SMC (DO-214AB) packaging and 10/10,000 μs in DO-218AB, it said. The bidirectional devices work over -55 to +175°C for automotive, telecom and industrial applications. With 24V maximum clamping, XMC7K24CA series offers 180A peak ...