Home » News » Products » Connectors (page 5)

Connectors

The latest Electronics Weekly product news on connectors, electro-mechanical devices for joining electrical circuits.

Binder turns to PBC15 quick-locking power supply connector

binder_PBC15-300x200.jpg

Binder, the industrial connector specialist, has created a new power bayonet connector, the PBC15. Suitable for power supply and signal linking of devices via one cable, the PBC15 – in the field of power supply connectors – is intended to bridge gaps between M12 and M23 designs. Typical applications are foreseen in factory and process automation and machine engineering. With ...

High-voltage medical connectors can be autoclaved

odu high voltage connector for high voltage

ODU has introduced high-voltage variants into its medical connector range. Medi-Snap High Voltage are designed for “transmission of high pulse and continuous voltages together with simultaneous provision of high pulse currents and sensitive signals in a compact design”, according to the company. “Both pure high-voltage connectors and combinations of up to 5kV peak together with signals in a hybrid configuration ...

8.5GHz connectors go straight to the PCB

Powell - Gigalane GDBC contacts

Powell Electronics has announced that will be stocking a second generation  of GDBC (Gigalane direct board contact) one-piece contacts from Gigalane. The “contacts are easy to use in the assembly as they require no SMT”, said Powell. Instead, the connector is installed in the face of an assembly, and then pushed face-down onto the PCB to make coaxial contact – ...

Multi-direction PCB-to-everywhere else contacts

Harwin multiDirection spring clip contacts

Harwin has added four height options to its multi-directional spring contact range, which now spans from 4 to 10mm. “Although there are already many spring contacts that are suitable for vertical compression applications, it is less common to find parts that can also allow horizontal operation, Support for multi-directional operation is therefore appealing,” according to the company. The new parts ...

ELIV Congress: Board-to-cable connector for battery management gets connector position assurance

Yamaichi Electronics Y-Lock v4

Yamaichi Electronics has added optional CPA (connector position assurance) to its automotive Y-Lock Pullforce board-to-cable connectors for battery management and cell contacting. Found in Y-Lock Version 4, the CPA is located on the stiffener side and latches with the connector when actuated. “The FFC-FPC can only be released after the CPA has been unlocked,” according to the company. “The v4 ...

EMI back-shells for Harwin mini power connector

Harwin Kona power connector backshells

Harwin has created a range of retro-fittable 360° anti-interference back-shells for its Kona high-power connector series. “These back-shells will prevent unwanted EMI leaking out from the connector-cable assembly into the surrounding system,” according to the company. “The two-part construction of the Kona backshells enables engineers to up-grade their existing cable assemblies with 360° EMC shielding.” Kona connectors come in 2, ...

“Widest axial mating tolerance” RF contacts

Powell Phoenix PkZ series contacts

Component manufacturer and distributor Powell Electronics is claiming “the widest axial mating tolerance of blind-mate RF contacts currently available on the market” for coaxial connector parts from Phoenix Company of Chicago, which it is now stocking. “This enables the contacts to accommodate large radial and axial misalignment tolerances found in modular applications,” continued Powell. They provide “constant impedance even as ...

High-voltage automotive connectors

Mouser Amphenol FCI Minitek MicroSpace high-voltage connectors

Amphenol is aiming at vehicles with high-voltage versions of its MicroSpace connectors. “The LV214 Severity-2 compatible connectors are compact, robust and versatile,” according to distributor Mouser, which is stocking the parts. “With a rating of up to 1,200V and 4A, these connectors are suitable for higher power applications, including automotive navigation, infotainment and HVAC clusters.” Selectively-loading a higher pin-count connector ...

Harwin: CAD models, live distributor stock levels and on-line pricing

Harwin TraceParts downloadable CAD models

Connector maker Harwin has teamed up with TraceParts to offer 3D models of its connectors as well as models of its board-level EMC shielding and PCB hardware. “Models are available in all current file formats for engineers to integrate directly into their CAD system,” according to Portsmouth UK based Harwin. The same deal has put Harwin’s parts onto TrustedParts, a ...

N-type connectors and cable assemblies

Wurth ntype connector

Würth Elektronik introduced N type 50Ω cable and PCB connectors to MIL-STD-348. PCB jacks are available in straight and angled through-hole versions, or as four-hole flanged panel connectors with round post or solder cup. Cable-end versions (pictured right) are available loose for field assembly, or pre-assembled onto cables (including N-type to SMA adaptors, picture below), and there are coax bulkhead ...